A. 油田沉降罐或污水罐方面的英文介绍资料
这方面的资料真的很难找,太偏了.只找到以下相关资料,你看一下吧:
另外,我看到网络知道上有人说"油田沉降罐"是oil field settling tank,"污水罐"是sewage cylinder,这样的翻译应该是错误的,因为按照这样的关键词根本无法搜到相应的资料.而根据我目前搜集到的资料来看,"沉降罐"是Clarifying tank是毫无疑问的(这是从专利设计网上得到的信息),那么,"油田沉降罐"就应该是oilfield clarifying tank;而"污水罐"则应该是"septic tank "(这是由专业机械销售商网站得到的信息).
还有,你按clarifying tank和septic tank两个关键词搜索图片的话能搜到很多结构图,那上面有各组成部位的名称,应该也能用到。
1.Clarifying tank(沉降罐) :Methods and apparatus for separating solid particles from a fluid. One preferred embodiment includes a tank for settling particles out of the fluid, a conical chamber at the bottom of the tank, an outlet connected to conical chamber, and a conical auger within the conical chamber. The tank may have a tangential inlet that creates a fluid circulation that exerts a centrifugal force on the solid particles to increase the settling of particles out of the fluid. The tank may have a static spiral on the inner wall that helps small particles coalesce into larger particles that settle faster out of the fluid. The fluid content of the solids removed from the tank may be controlled by varying the rotational speed of the conical auger. The rotational speed of the conical auger may be varied depending on the torque required to rotate the conical auger.
2.Septic Tank - Mound System(这个还有图例讲解的,应该不错)
http://ohioline.osu.e/aex-fact/0744.html
3.Septic Tank Inspection and Trouble-shooting(是讲污水罐存在的问题的)
http://www.montana.e/wwwpb/pubs/mt9403.html
4.Septic Tank and Drainfield Operation and Maintenance (讲污水罐的使用和保养)
http://www.montana.e/wwwpb/pubs/mt9401.html
5.What you should know about your septic tank(污水罐的基础知识)
http://www.health.sa.gov.au/PEHS/branches/wastewater/maintain-septic-tank.htm
6.An Introction to Septic Tank Sewage Treatment Systems(污水罐污水处理系统的介绍)
http://www.johnstonsmith.co.uk/fact4.html
7.Information for septic tank and septic tank systems(如题,就是各种关于污水罐的知识)
http://www.aboutseptictanks.com/
8.Septic Tank Additives(这个是PDF文档,没有PDF阅读器的话你也可以选择浏览HTML页面)
http://www.doh.wa.gov/ehp/ts/WW/Septic-Additives-SFQ-Wint2002.pdf
9.Technique for increased retention time in oil field settling tanks :(油田沉降罐的XXX技术,你自己看吧,我已经晕了,呵呵)A technique for continuous gravity separation of a proced oil and water emulsion has particular utility in separating water for reinjection ring a waterflood secondary recovery operation without loss of saleable oil. The method employs a flow direction means to introce the proced oil-water emulsion into a large volume settling tank substantially tangential to the tank wall and then withdraws the separated oil and water. The apparatus of the instant invention comprises: (a) a tank, (b) an oil-water inlet means, (c) a flow direction means connected to the oil-water inlet means to direct the oil-water emulsion into the settling tank tangential to the tank wall, (d) a bottom-center located water outlet pipe, and (e) an oil outlet pipe.
10.ANALYSIS OF OIL FIELD EQUIPMENT CONDITION IN THE PROCESS OF EXPLOITATION(这个只是擦边的资料)
http://www.ogbus.com/eng/authors/Khasanov/Khasanov_1.pdf
11.这个是介绍油田罐的http://www.northern-steel.com/procts/oilfield/bbl-400.html
B. 油田上使用的污水罐和污水缓冲罐是一回事吗
功能上基本相似。但是有个最大的区别,污水罐是常压容器,而污水缓冲罐是压力容器。现在回很多油答气田用污水缓冲罐而不用污水罐,主要原因就在于安全距离,使用污水缓冲罐的话,可以放在流程区,而污水罐不能,相信你也看到过很多站场上, 把污水罐放在站场的某个角落里,原因就在于安全距离,所以使用缓冲罐的话,站场的占地面积可以大大减小。
C. 污水罐做防腐哪种涂料合适
污水罐做防腐主要三种,手糊玻璃钢、喷涂聚脲和衬PVC内胆。
1.手糊玻璃内钢就容是环氧树脂加玻璃丝布,一层树脂一层布,一层树脂一层布,最后表面一层树脂,俗称五油三布工艺。
2.喷涂聚脲涂层一般1.5㎜厚,是施工最简单的。
前两种不适合冷热交替、温差变化大的环境,容易变形脱层。
3.制作PVC内胆是在罐内壁铺一层PVC软板,接缝采用塑焊工艺,抗酸碱性强,不怕温差变化,可以说是一劳永逸的办法,但是价格高。
D. 下水道污水清洗疏通车多少钱 报价
水罐1.5方,污水罐4方,15万多